- UIN BEARING CORP.
- Cylindrical Roller Bearing Linear Bearing Needle Roller Bearings
English
Home>Products>Rod End Bearing>PHSB5 Inch Female Rod End Bearing, Heim Joints
PHSB5 Inch Female Rod End Bearing, Heim Joints
category
Rod End Bearing
TRW 2x Bearing SPECIFICATIONS
PHSB5 Inch Female Rod End Bearing, Heim Joints 7/8-9 UNC Cap bolt 169.875 mm H1 Engineering Calculator , Rod End Bearing Manufacturing Service . Get Your 289.999 mm Da Free. UIN BEARING CORP.
- TRW
2x
- 7/8-9 UNC
- 289.999 mm
- 169.875 mm
- 22232 CCK/W33
- 558.8 mm
- 338.137 mm
- 89.789 mm
- 2 x B10724-130
-
UIN BEARING CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
PHSB5 Inch Female Rod End Bearing, Heim Joints Technology
- 7/8-9 UNC
- 289.999 mm
- 169.875 mm
- 22232 CCK/W33
- 558.8 mm
- 338.137 mm
- 89.789 mm
- 2 x B10724-130
- 38.5 kN
- EPR 16
TRW 2x Rod End Bearing Specification details
| No. | Brand | s | h | a | l | L | T | H | r |
| DMT-10 | - | - | - | - | - | - | - | - | - |
| 6210 | fag | - | - | - | - | - | - | - | - |
| [10PC] | - | - | - | - | - | - | - | - | - |
| 3151 | - | - | - | - | - | - | - | - | - |
| 1200X1000 | - | - | - | - | - | - | - | - | - |
| 2008 | NSK | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| Z50 | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| BMW:E60,E61,E39,5 | - | - | - | - | - | - | - | - | - |
| 6907 | NTN | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 4x16x5mm | - | - | - | - | - | - | - | - | - |
| 5K0498621 | NSK | - | - | - | - | - | - | - | - |
| 39X72X37X37 | - | - | - | - | - | - | - | - | - |
| R902504814 | Rexroth | - | - | - | - | - | - | - | - |
| S6D125E | - | - | - | - | - | - | - | - | - |
| H71922C.T.P4A.2RZ | - | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | 298.45 mm | - |
| Ms800 | - | - | - | - | - | - | - | - | - |
| PHS22 Rod End Bearing 22*50*28mm | D1:125 mm; Tolerance housing:H7; a:2.5 mm; Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; B:50 mm; Mass bushing:1.46 kg; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v max.:0.5 m/s; |
| SI 70 ES-2RS Rod End Bearing 70x162x49mm | Weight:0.20 KGS; Availability:In Stock; d:0.5 inch; D:1.313 inch; SKU:lj1/2-r&m; B:0.375 inch; Seals or Shields:Open Type; Clearance:Standard; |
| SA6E Rod Ends With Male Thread | SKU:7310bwg-nsk; Availability:In Stock; Static Load Rating (kN):48; d:50mm; Dynamic Load Rating (kN):68; Seals or Shields:Open Type; Grease Limiting Speed (r/min):5000; Oil Limiting Speed (r/min):6700; Cage Type:Steel; Weight:1.12 KGS; |
| GAR30-DO Rod End 30x73x146.5mm | Static Load Rating (kN):6.25; Availability:In Stock; Dynamic Load Rating (kN):8.3; B:9mm; d:30mm; Oil Limiting Speed (r/min):45500; Preload:Medium; Clearance:Standard; SKU:7906ctrqump3-nsk; Cage Type:Plastic; |
| GAR12-DO Rod End 12x34x71mm | B:76.20 mm; Keyway f:6.4 mm; Oil Speed Rating Max. n2:6500 rpm; D:160.3000 mm; d:88.903 mm; Keyway e:89.5 mm; Oil Mist Speed Rating Max. n3:9000 rpm; X-L-O Part Number:165-87; Preload:50 lb; Fillet Radius ra:2.00 mm; |
| PB16S Bearing 16x38x21mm | Cage Type:Steel; Seals or Shields:Open Type; Clearance:C3; d:10mm; SKU:2200jc3-qbl; D:30mm; B:14mm; Weight:0.02 KGS; Availability:In Stock; |
| GIR12-DO Rod End 12x34x67mm | Seals or Shields:Open Type; d:105mm; SKU:3mm9121wicrdul-timke; Weight:1.62 KGS; Dynamic Load Rating (kN):84.5; Clearance:Standard; B:26mm; D:160mm; Static Load Rating (kN):92.1; Cage Type:Plastic; |
| SQZ5RS China Ball Rod Ends Joint Bearing | Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; d:20 mm; Coefficient of friction µ min.:0.08; B:30 mm; Coefficient of friction µ max.:0.15; α:105 °; Permissible sliding velocity v max.:0.5 m/s; Specific static load factor K0:45 N/mm²; h:21 mm; |
| GIKR30-PW Rod End 30x70x145mm | D:52.0000 mm; Basic Dynamic Radial Load Rating C:22900 N; Fillet Radius ra:1.00 mm; Accessories:One Shield & Snap-Ri; Grease Speed Rating n1:8000 rpm; Basic Static Radial Load Rating Co:21200 N; d:25.000 mm; B:20.60 mm; Oil Speed Rating n2:11000 rpm; Sealed Speed Rating n3:8000 rpm; |
| SAZK10S SALZK10S Inch Bearing 0.625x1.5x0.75inch | Mass bearing (including seat washer where applicable):665 kg; Basic static load rating C0:22000 kN; Fatigue load limit Pu:208 kN; D:1630 mm; D1 ≈:1408 mm; Limiting speed:260 r/min; Da max.:1495 mm; d1 ≈:1622 mm; r1,2 min.:8 mm; Minimum load factor A:2900; |
| CMR4 CML4 GMR4 GML4 Rod End Bearing 0.25x0.75x0.375 Inch | Dynamic Load Rating (kN):2.34; d:6mm; Fatigue Load Rating (kN):0.04; D:19mm; Clearance:C3; B:6mm; Limiting Speed Rating (r/min):24000; Weight:0.01 KGS; Availability:In Stock; Seals or Shields:Two Rubber Seals; |
| JFT6R Stainless Steel Rod End Bearing 6x18x39mm | d2 ≈:1185 mm; D1 ≈:1403 mm; Basic static load rating C0:48000 kN; Fatigue load limit Pu:2550 kN; b:22.3 mm; D:1580 mm; Basic dynamic load rating C:25650 kN; r1,2 min.:12 mm; Calculation factor Y1:2.4; Reference speed:140 r/min; |
| SAJK10C SIJK10C Bearing 10x30x14mm | Sealed Speed Rating n3:550 rpm; Basic Static Radial Load Rating Co:710000 N; Grease Speed Rating Open/Shielded n1:900 rpm; d:440.000 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:1100 rpm; Basic Dynamic Radial Load Rating C:410000 N; D:600.0000 mm; Fillet Radius ra:4.00 mm; B:74.00 mm; |
| JFT5 Stainless Steel Rod End Bearing 5x16x35mm | Fatigue Load Rating (kN):9.7; Reference Speed Rating (r/min):4350; Clearance:Standard; Weight:6.07 KGS; Static Load Rating (kN):193; Dynamic Load Rating (kN):163; Seals or Shields:Open Type; Availability:In Stock; Cage Type:Steel; SKU:3315-fag; |
| CFR8 CFL8 GFR8 GFL8 Bearing 0.5x1.312x0.625inch | Static Load Rating (kN):10; Fatigue Load Rating (kN):0.425; Cage Type:Plastic; Seals or Shields:Open Type; D:52mm; d:20mm; Weight:0.02 KGS; B:15mm; Availability:In Stock; Limiting Speed Rating (r/min):18000; |
| GK50-DO Hydraulic Rod End Bearing 50x112x144mm | Seals or Shields:Open Type; B:110mm; Weight:36.60 KGS; Static Load Rating (kN):2200; Availability:In Stock; d:170mm; Clearance:Standard; Dynamic Load Rating (kN):1660; Reference Speed Rating (r/min):1200; Limiting Speed Rating (r/min):1100; |
PHSB5 Inch Female Rod End Bearing, Heim Joints Video
TRW 2x INTERCHANGE
Rod End Bearing Part series 2x is a potential replacement for these common bearing part numbers:
2x
2x
2x
2x
2x
2x
2x
2x
Contact Us
- UIN BEARING CORP.
- Address466 South Power Road, Dacomb, FR 95354-6458 U.S.A.
- Phone(Working Time)+1-654-587-6477
- Fax
TRW 2x Technical Articles
| PLUMMER BLOCK BEARING PRICE LIST |
| 32218 BEARING PRICE LIST |
| TIMKEN BALL BEARING PRICE LIST |
Rod End Bearing CATEGORIES
- Cylindrical Roller Bearing
- Linear Bearing
- Needle Roller Bearings
- Pillow Block Bearing
- Radial Spherical Plain Bearings
- Renault Bearing
- Robotic Bearing
- Rod End Bearing
- Roller Bearing
- Rolling Mill Bearing
- 6203z Bearing
- 6006 Bearing
- F623zz Bearing
- 6301 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Cylindrical Roller Bearing
- Four-Row Cylindrical Roller Bearing
- Thrust Tapered Roller Bearing
- Spherical Roller Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
- 220j Belt
- Gates Powergrip Timing Belt
- Bando Rib Ace Belt
- K060900 Belt
- K060910 Belt
- Micro V Belt
- Gates Drive Belts
Customers Who Viewed TRW 2x Bearing Also Viewed
65 mm x 140 mm x 33 mm PHSB16L / PHSB 16 L Rod End Bearing With Internal Thread 25.4x69.85x139.7mm
PHSB12R / PHSB 12 R Rod End Bearing With Internal Thread 19.05x44.45x95.25mm
PHSB10R / PHSB 10 R Rod End Bearing With Internal Thread 15.875x38.1x82.55mm
30 mm x 62 mm x 16 mm SILR40ES / SILR 40 ES Female Thread Rod End Bearing 40x96x136mm
GIHNRK200-LO / GIHNRK200LO Hydraulic Rod End Bearing 200*418*620mm